Choosing the Right Security Lock For Your Van<br /><br />The right security lock can deter thieves and help protect your cargo. Certain locks can be installed by the homeowner, while others require assistance from a professional to ensure they are properly installed and offer maximum security.<br /><br />Slam locks are ideal for couriers who have multiple deliveries. They lock automatically when the door is closed. Deadlocks work with the lock you purchased from the manufacturer and provide a further layer of protection.<br /><br />Dead Locks<br /><br />Van dead locks offer an additional physical security measure to deter criminals. These aftermarket locks are specially designed and extend through the van door. They connect to the frame so they cannot be opened without a key. These locks are particularly useful for vans that have to be parked for a long period of time, or are carrying expensive equipment.<br /><br />These are ideal for those who use the remote locking systems of the factory in the daytime, but would like to add an additional layer of security at night or when their vehicle is located in an area they believe is vulnerable. When a key is used to operate them, they throw a bolt into a receiver attached to the body section opposite of the vehicle. This adds an additional layer of security over the locks that are factory installed.<br /><br />These locks aren't automatic locks like the Slam Locks and Hook Locks that we also sell online. They must be manually operated by the driver using the key supplied. A straight bar lock is ideal for rear doors and twin sliding doors, whereas a hook lock can be used on both rear and front doors in small to medium vans.<br /><br />They're designed to stop an intruder from attacking the lock and forcing open the door, which could allow them to access the van's cab or load area. They're designed specifically for each type of van and are placed in the ideal position to provide a second layer of protection against a specific attack techniques.<br /><br />The consequences of theft can be devastating for van owners as well as users, especially professionals like contractors and tradespeople who rely on their vehicles to carry essential tools and equipment that they cannot afford to lose. In addition to the expense to replace items stolen, it could cause income loss due to unplanned downtime and the hassle of finding alternative means of transport. Installing a quality van lock will help secure your possessions, deter thieves and reduce the risk of loss - and it may even help you save money on insurance costs.<br /><br />Hook Locks<br /><br />A hook lock is an effective way to deter theft in vans. It is a lock that can be placed on your vehicle's door. It operates independently from locks of the manufacturer and can only be operated by a key that is fully controlled by the driver. It comes with a hook-shaped bolt that can't be forced open and is constructed from top-quality materials. It is also extremely resistant to drilling and manipulation. Sold Secure is the UK's most trusted security testing body. Many models are designed to meet police specifications and are certified by Sold Secure.<br /><br />Take note of how much security your van requires prior to purchasing security locks. For instance, if you carry expensive tools or sensitive cargo, a more sophisticated lock such as deadlock or slam is more appropriate. On the other the other hand, if you're carrying items of lesser value, a basic slam lock may suffice. It is also advisable to examine your insurance policy to be sure that adding additional locking mechanisms won't cause it to be cancelled.<br /><br />When selecting a security locking system, you must also be aware of its weather resistance. Since vans are subject to the elements, your locks must be able to stand up to different weather conditions. They will not lose their effectiveness or be more easily manipulated by thieves. Moreover, you should also be aware of software updates for electronic locking systems in order to guard against security vulnerabilities and enhance their effectiveness.<br /><br />Lastly, it's essential to choose the lock that is simple to install. Some locks are made for DIY installation while others need professional installation to ensure they're installed correctly and perform according to the specifications. Whether or not you want to engage a professional to perform the installation will depend on your level of skill and confidence as well as the available resources.<br /><br />Catalytic Converter Locks<br /><br />Catalytic converters can reduce harmful emissions from your car. But, this essential component is also a target for thieves because of the precious metals it contains. The black market value of these precious materials has led to a rise in the theft of converters. Fortunately there are preventative measures available to combat this issue.<br /><br />Many people believe that an alarm system that is simple will suffice however, they tend to be less effective than a dedicated device specifically designed to protect your converter. These devices are designed to detect vibrations or heat, and then emit a loud noise to scare away potential thieves. These devices are more like security systems than deterrents and are generally more expensive than a typical locking system.<br /><br />The unique design of the Cat Clamp converter lock is a proven and time-tested solution to stop catalytic converter theft. The device is constructed of a stainless steel wire which runs around the catalytic converter as well as the frame of the car. The cable is twisted up to seven times and locked, making it extremely difficult for thieves to take away the converter. The unit can be set up in under 30 minutes, and it does not require drilling or welding. It is simple to install on a range of vehicles and is suitable for use on cars, trucks and SUVs, vans and other vehicles with catalytic converters.<br /><br />A metal cage that covers the entire catalytic converter unit is a different option to safeguard it. Although it's not as easy to put in as a cage made of metal but it does make the converter more difficult to steal. The cost of these plates can run between $150 and $270, depending on the model.<br /><br />Be aware that no security system is perfect however, taking preventive steps will lower the risk of theft. It is important to take the time to protect your vehicle will ensure that your possessions and yourself are secure, and can save you the expense of replacing a costly part. It's also a good idea to have your catalytic convert engraved with your VIN, since it will allow you to identify it when it is reclaimed and sold.<br /><br />Anti-Peel Kits<br /><br /><br /><br />It is designed to guard against the well-known 'Peel and Steal' technique this solution is mounted to the front edge of the vehicle's side load door. This improves the resistance to "peel and steal" attacks on the doors of your van by up to 3000%. The L4V Anti-Peel Kit, in conjunction with a high-positioned hook lock, reduces the risk that thieves will gain entry to your van via the side-load door.<br /><br />With the latest and most brash methods of van theft and the rate of crime increasing, it is vital that additional security measures for vans are utilized. The 'peel and steal' technique is the newest method of van theft. Thieves are able to steal tools and items by pressing down on the doors with their knees then bending, pulling and locking them. <a href="https://www.thekeylab.co.uk/van-security/">security van door locks</a> of attack is becoming commonplace, and has cost UK tradespeople thousands of pounds worth of tools and inventory.<br /><br />At Locks 4 Vans we have unveiled a new combination high hook lock + anti peel kit for the Ford Custom to provide a cost-effective solution to this growing problem. The Anti-Peel Kit, fitted to the barn door of your Ford Custom, reduces the risk of 'peel-and steal attacks by securing the door's skin and adding a second layer of protection. The hook built into the high L4V lock provides additional security to the door and helps keep it safe in the event that the anti-peel plates are removed.<br /><br />Our range of anti-peel kits can be purchased online and can be delivered directly to your vehicle in a matter of days. Our technicians will install the items. We have installers based in Greater Manchester and Tameside so are able to offer our services in areas like Manchester, Salford, Stockport, Ashton Under Lyne, Oldham and Rochdale.<br /><br />If you would like more information about improving the security of your van, contact us now. We have a number of options to aid you in improving the security for your van, from deadlocks to armour locks, and even shielding to defend against attacks by puncture.<br /><br />
Output
You can jump to the latest bin by adding /latest
to your URL
Keyboard Shortcuts
Shortcut | Action |
---|---|
ctrl + [num] | Toggle nth panel |
ctrl + 0 | Close focused panel |
ctrl + enter | Re-render output. If console visible: run JS in console |
Ctrl + l | Clear the console |
ctrl + / | Toggle comment on selected lines |
ctrl + ] | Indents selected lines |
ctrl + [ | Unindents selected lines |
tab | Code complete & Emmet expand |
ctrl + shift + L | Beautify code in active panel |
ctrl + s | Save & lock current Bin from further changes |
ctrl + shift + s | Open the share options |
ctrl + y | Archive Bin |
Complete list of JS Bin shortcuts |
JS Bin URLs
URL | Action |
---|---|
/ | Show the full rendered output. This content will update in real time as it's updated from the /edit url. |
/edit | Edit the current bin |
/watch | Follow a Code Casting session |
/embed | Create an embeddable version of the bin |
/latest | Load the very latest bin (/latest goes in place of the revision) |
/[username]/last | View the last edited bin for this user |
/[username]/last/edit | Edit the last edited bin for this user |
/[username]/last/watch | Follow the Code Casting session for the latest bin for this user |
/quiet | Remove analytics and edit button from rendered output |
.js | Load only the JavaScript for a bin |
.css | Load only the CSS for a bin |
Except for username prefixed urls, the url may start with http://jsbin.com/abc and the url fragments can be added to the url to view it differently. |